If you notice that your air conditioning system has started to lose cool air, you might want to know some tips for troubleshooting common AC problems. These problems include dirty or clogged filters, short-circuiting, and refrigerant leaks. If you don’t have a clue how to solve these issues, you can always contact a professional technician.

Circuit breaker keeps tripping repeatedly

If your circuit breaker keeps tripping repeatedly, you may need to reset it. If you don’t have a reset button, you can try turning off and on the circuits one at a time until you find the one that is causing the problem. You should also check that you’ve unplugged anything that doesn’t have an off switch, since these will cause more electricity to pass through the wires.

The most common cause of circuit breakers tripping is overload. This happens when the electrical demand is more than the circuit’s capacity, such as when too many appliances or light fixtures are running at the same time. This causes the circuit to overheat, putting the rest of the appliances on the circuit at risk.

Another common problem is a short in the wiring in an outlet or wall switch. In these cases, the breaker will trip and tell you where the short is located. In either case, you should call a licensed electrician to fix the problem. For the meantime, you can stop using the plug or switch until the issue is resolved.

If your circuit breaker keeps tripping repeatedly, there could be a few other problems. One of these may be an arc fault. If the wires are loose or corroded, they will create a short contact, creating an arc or spark. If it continues to do so, it may lead to an electrical fire.

Another possible cause is worn-out input wires. If they are busted or have broken connections, this may result in current leakage, which could cause a short circuit and trigger the breaker to trip. These issues can cause the circuit breaker to trip repeatedly and result in a dangerous electrical shock. If you don’t feel comfortable handling electrical wires, it is best to consult a licensed electrician.

Dirty or clogged filters

Dirty or clogged filters in your air conditioner can lead to a number of common problems. Dirty air filters allow dirt, dust, and other particles to circulate throughout the entire home, which can affect your health, particularly if you have allergies or asthma. Clogged filters can also cause your system’s blower motor to stop working properly. This can lead to costly emergency repairs or system failure.

It is very important to change the air filter in your air conditioning system once a month or every three months. Dirty air filters cause the air conditioner to work harder and can reduce the life expectancy of the unit. Regular filter replacement helps reduce the load on your system, which can result in fewer repair calls and lower energy bills.

A dirty or clogged air filter can also lead to overheating in your air conditioning system. The blocked airflow restricts the amount of cold air passing through the system, resulting in an uncomfortable warm environment. If you experience these problems with your air conditioner, it is best to call an expert in air conditioning repair. These professionals will not only diagnose the problem but also provide maintenance and repair services.

If you notice that your air filter is clogged or dirty, you should change it right away. If the filter is too dirty, your system will work harder, which will increase your utility bills. Dirty filters should be replaced every month, so you can keep your cooling costs low.

A dirty or clogged air filter can increase your energy usage by as much as five percent to fifteen percent. It can also damage integrated HVAC units, such as blowers and combustion chambers. Then, you may have to pay for a major repair.


The reason for short-circuiting is that the AC compressor is pulling too much energy. This causes the compressor to overheat and can cause a power surge. If the compressor is hard-started, it can also send amp spikes, which will overload the circuit breaker and turn the AC off.

Short-circuiting is a common AC problem that will cause your AC to trip and shut down. It may happen immediately or within five minutes. This is due to a faulty wire or a shorted circuit. Fortunately, this can be fixed by reapplying the protective coating on the wires or replacing the wire.

Another common issue with air conditioning is short-cycling. This type of problem can cause the air conditioning to get stuck on the start-up cycle, wasting energy and money. In addition, it may result in the premature replacement of the air conditioner. If you notice short-cycling, call a professional immediately and avoid running the air conditioning system.

When the circuit breaker trips, it may indicate that a wiring issue is the cause of the problem. If the power surge is caused by a capacitor failure, a loose connection or a short in the wiring, the AC will be unable to function properly. In addition, if the circuit breaker trips again, a fire can result.

Another cause of short-circuiting in air conditioning systems is abrasion. The insulation around the motor can wear out and make it susceptible to a short circuit. Eventually, the wires will overheat and burn. In order to prevent a fire, it is important to identify the cause of the short and fix the faulty wiring. However, since dealing with circuits can be quite dangerous, BAC services in Brisbane are available to contact for hiring experienced personnel.

Refrigerant leaks

There are several common air conditioning problems that can cause the system to stop functioning. Among them are leaky ducts, refrigerant levels that are too low, and faulty thermostats. If you suspect a faulty thermostat, the first step is to reset it. In case the problem persists, you can call an HVAC professional for help.

The problem could be refrigerant leaks or the condenser coil freezing. While this may sound like a minor issue, it can be extremely expensive to fix. Another common cause is dirty air filters. If the filter is clogged, ice will form on the coil. Replacing the filter can fix the problem. In cases of serious problems, professional HVAC evaluation is required.

If the air filter is dirty, it will decrease the air flow and decrease efficiency. This could also make the entire system freeze up. Tall weeds and grass can also clog the condenser, preventing it from receiving enough air. Also, make sure the thermostat is set to the correct temperature.

The thermostat may be to blame if the air conditioning unit won’t turn on. The thermostat may be out of alignment or the sensor no longer has a way to sense the room’s temperature. You should also check the outside condensing unit to make sure that the fan and compressor are running.

Another common problem is the leak of refrigerant. In this case, you need to call an HVAC technician to repair it. Depending on the size of the leak, a leak can require the replacement of the entire network.

Wiring problems

One of the easiest and quickest ways to diagnose a malfunctioning air conditioner is to look for faulty wiring. These can lead to many problems, including short circuits that can damage equipment and create fire hazards. Additionally, worn-out wires can cause problems with capacitors and fuses. When one of these components isn’t functioning properly, the AC may not start at all.

Another sign of a wiring problem is frequent unit shutdowns. The frequency of this problem can be a sign of a more serious problem. If your unit is shutting down more than once a day, it’s likely that its wiring is causing the problem.

A common problem with faulty wiring is that it’s pulling too much current from the main electrical unit. This will cause the breaker to trip. Breakers are designed to protect the electrical panel by limiting the amount of current a single device can draw. This automatic safety feature prevents major fires from occurring if an electrical component isn’t properly maintained. For this reason, it’s recommended to have your air conditioner’s wiring inspected twice a year by a professional HVAC contractor.

If your air conditioning unit is leaking water or refrigerant, it’s best to call a professional for assistance. The water or refrigerant leaks could also be a sign of a larger problem. A professional HVAC repair can troubleshoot the wiring and thermostat, which are two of the most common problems.